DS1067-062C 12 LBT20063
1.2.1 Function keys
Symbol 1067/026 key Associated function
T1 Silent panic indication
T2 Emergency indication
T3 Fire indication
T4 Clean glass
Table 6 - 1067/026 keypad function keys
1.2.2 Status icons
Figure 4 – 1067/026 keypad display and status icons
The LEDs and icons on the keypads indicate system status and alarms. Available information is shown in the table below.
The amount of displayed information depends on the system status level (armed or disarmed), the EN50131 grade set
during programming and the access level (see paragraph 5.1 System access codes). Paragraph 1.2.2.1 Use of LEDs and
icons with EN50131 grade 3 lists the information available in the various cases.
Symbol Description Supplied indications
Power
Present = no mains power
Highlighted = see electric mains failures details
Failure
Present = failures present
Highlighted = see details of current failures
Timed
programmer
Present = commands present for the current day
Highlighted = control activation warning
Open inputs
Present = open input
Highlighted = see details of current open inputs
Inhibited or
isolated inputs
Present = inhibited or isolated input
Highlighted = see details of current inhibited or isolated inputs
Alarm
Present = at least one alarm condition present
Highlighted = see details of current alarms
Power
Present = at least one tamper condition present
Highlighted = see details of current tampering
Table 7 - LED and icon indications of 1067/026 keypad
To Next Page
Loading...
