DS1067-062C 69 LBT20063
5.6.10 How to disable a User
Proceed as follows to disable a user:
1) Enter <Master code>, press , then and finally press repeatedly until
ENABLE appears.
2) Press
and then several times until USER appears.
3) Press .
4) Press and to select the user. Press to confirm.
5) Press . If, necessary, press to make DISABLE appear.
6) Press to disable the user.
7) Press
repeatedly to exit from the menu.
5.6.11 How to disable a key
Proceed as follows to disable a key:
1) Enter <Master code>, press , then and finally press repeatedly until
ENABLE appears.
2) Press
and then several times until KEY appears.
3) Press
.
4) Press
and to select the key. Press to confirm..
5) Press
. If, necessary, press to make DISABLE appear.
6) Press
to disable the key.
7) Press
repeatedly to exit from the menu.
5.6.12 How to disable the Technical Manager
Technical Manager enabling is revoked whenever a User or Master code is entered or when an electronic or proximity key
is used.
UT01:MASTER
ENABLE
ENABLE
USER
USER
UT02:...
UT02:...
ENABLE/DIS USER
ENABLE/DIS USER
DISABLE
1067/052A
12/01/2014 10:10
UT01:MASTER
ENABLE
ENABLE
KEY
KEY
KE01:...
KE01:...
ENABLE/DIS KEY
ENABLE/DIS KEY
DISABLE
1067/052A
12/01/2014 10:10