urmet domus 1067 User Manual

DS1067-062C 53 LBT20063
4.3 DESCRIPTION OF EVENTS
An event is a voluntary or involuntary occurrence managed by 1067/024, 1067/032A and 1067/052A control panels to
send indications, store conditions or control implementations.
The indication of an event may precede an alarm indication, like a no mains power event.
The event types and their distinctive features are illustrated below.
4.3.1 Reset fire alarm event
This is generated
when...
• A reset fire alarm input is opened.
It activates...
• The programmed reset fire alarm outputs which have at least one zone in common with the
input which generated the event for one second.
It is stored...
• In the Diagnose Log.
In addition...
• Ends the respective fire indication.
• Resets the fire alarm indication in the temporary memory.
• Switches off the LED on the keypads and on the readers on which the alarm was indicated.
IMPORTANT! In case of fire alarm indication and manual resetting, restore the environmental conditions in the room
where the alarm occurred and check that the detector is armed again to be able to detect a new danger situation.
4.3.2 Technological type 1 event
The 1067/024, 1067/032A and 1067/052A control panels allow to manage some home automation functions (turning on
the heating, managing the garden sprinkler system etc.) using technological events (type 1, 2 and 3), the door opener
event and the courtesy light event.
The technological and courtesy light events are always active (H24), while the door opener event is only active when the
zones are disarmed.
This is generated
when...
• A technological type 1 input is opened.
It activates...
• The programmed technological type 1 outputs which have at least one zone in common with
the input which generated the event.
• The dialler to send the respective technological alarm message (if programmed) in form of
numeric code, vocal call, text message or modem communication.
It is stored...
• In the Event Log and the Diagnose Log.
It lasts...
• For until at least one of the programmed technological type 1 input with at least one zone in
common with the output remains open.
4.3.3 Technological type 2 event
This is generated
when...
• A technological type 2 input is opened.
It activates...
• The programmed technological type 2 outputs which have at least one zone in common with
the input which generated the event.
• The dialler to send the respective technological alarm message (if programmed) in form of
numeric code, vocal call, text message or modem communication.
It is stored...
• In the Event Log and the Diagnose Log.
It lasts...
• For 1 second
4.3.4 Technological type 3 event
This is generated
when...
• A technological type 3 input is opened.
It activates...
• The programmed technological type 3 outputs which have at least one zone in common with
the input which generated the event.
• The dialler to send the respective technological alarm message (if programmed) in form of
numeric code, vocal call, text message or modem communication.
It is stored...
• In the Event Log and the Diagnose Log.
It lasts...
• For until a valid code is entered on the keypad and all the inputs programmed as technological
type 3 which have at least one zone in common have returned to rest condition.

urmet domus 1067 Specifications

General

Brand	urmet domus
Model	1067
Category	Antenna
Language	English