urmet domus 1067 - Introduction

DS1067-062C 6 LBT20063
INTRODUCTION
CONVENTIONS USED
The following conventions are used in the manual for the sake of simplicity:
This is the LCD with the displayed message.
Unless otherwise specified, the same message is shown on the touchscreen keypad.
, , , , …
This is the equivalent key to be pressed on the keypad.
<Master code>
<User code>
<Technician code>
<Technical Manager code>
This indicates the code to be entered using the keypad.
<Master / User code>
This means that either code may be entered on the keypad indifferently.
Pay attention to the following symbols:
This symbol indicates an important warning.
This symbol indicates advice.
This symbol indicates EN50131 grade 3 compliance.
The compliance of the system as a whole is equal to the minimum certification of the installed devices and
of the enabled functions.
This symbol indicates EN50131 grade 2 compliance.
The compliance of the system as a whole is equal to the minimum certification of the installed devices and
of the enabled functions.
This symbol indicates that EN50131 compliance may depend on other functions enabled in the system.
This symbol means that the function or device will not affect the EN50131 certification grade.
This symbol means that the function or device will cancel EN50131 certification.