urmet domus 1067 User Manual

DS1067-062C 55 LBT20063
4.3.10 Isolated input event
This is generated
when...
• The inputs are isolated manually.
It activates...
• The programmed isolated input outputs which have at least one zone in common with the
isolated input.
• The dialler to send the isolated inputs message in form of numeric code (if programmed).
It is indicated...
• On the yellow isolated inputs LEDs on the keypads which have at least one zone in common
with the isolated input.
It is stored...
• In the Event Log and the Diagnose Log.
• In the isolated input list.
At the end of input
isolation, the control
panel...
• Stores the end of input isolation event in the Event Log and in the Diagnose Log.
• Deactivates the programmed isolated input outputs associated to the zones which have no more
isolated inputs.
• Switches off the yellow isolated inputs LEDs on keypads associated to the zones which have
no more isolated inputs.
4.3.11 Arm/disarm zones event
This is generated
when...
• One or more zones are armed.
• One or more zones are disarmed.
It activates...
• The programmed zone status outputs and at least one zone armed by overriding, the RM AND
outputs and the RM OR outputs.
• The dialler to send the zone armed and disarmed message (if programmed) in form of numeric
code, vocal call or text message.
It is indicated …
• On Status LED on keypads associated to at least one concerned zone.
It is stored...
• In the Event Log and the Diagnose Log.
4.3.12 Arm/disarm zones override event
This is generated
when...
• The arming of one or more zones is overridden (e.g. because there are open inputs).
It activates...
• l The programmed zone status outputs and at least one zone armed by overriding, the RM AND
outputs and the RM OR outputs.
• The dialler to send the zone armed and disarmed message (if programmed) in form of numeric
code, vocal call or text message.
It is stored...
• In the Event Log and the Diagnose Log.
4.3.13 Open input event
This is generated
when...
• An input is opened.
It activates...
• The programmed open input outputs associated to the zone to which the input belongs.
It is indicated …
• On the open input LED of the keypads associated to the input.
• On the red LED blinking on the readers if no alarms or failures/faults are being indicated.
4.3.14 Open input test event
This is generated
when...
• A customised test input is opened.
It activates...
• The programmed open input outputs associated to the zone to which the input belongs.
It is indicated …
• On the open input LED of the keypads associated to the input.
• On the red LED blinking on the reader if it is not already on fixed to indicate faults/failures or
alarms.
It is stored...
• In the Event Log.
• In the Diagnose Log.

urmet domus 1067 Specifications

General

Brand	urmet domus
Model	1067
Category	Antenna
Language	English