urmet domus 1067 User Manual

DS1067-062C 65 LBT20063
5.6.1 How to enable the Installer
The Installer must have been previously enabled to work on the system. For safety reasons, Installer enabling is cancelled
whenever a User or Master code is entered or when an electronic or proximity key is used.
IMPORTANT! The Installer is automatically enabled each time the system is turned on.
Proceed as follows to enable the Installer:
1) Enter <Master code>, press , and and finally press repeatedly until
ENABLE appears.
2) Press
.
3) Press . If, necessary, press to make ENABLE appear.
4) Press to enable the installer.
5) Press
repeatedly to exit from the menu.
5.6.2 How to enable a user
Each user must have been previously enabled to work on the system.
Proceed as follows to enable a user:
1) Enter <Master code>, press
, then and finally press repeatedly until
ENABLE appears.
2) Press
and then several times until USER appears.
3) Press
.
4) Press
and to select the user. Press to confirm.
5) Press
. If, necessary, press to make ENABLE appear.
6) Press to enable the user.
7) Press repeatedly to exit from the menu.
UT01:MASTER
ENABLE
ENABLE
INSTALLER
INSTALLER
ENABLE
ENABLE
INSTALLER
1067/052A
12/01/2014 10:10
UT01:MASTER
ENABLE
ENABLE
USER
USER
UT02:...
UT02:...
ENABLE/DIS USER
ENABLE/DIS USER
ENABLE
1067/052A
12/01/2014 10:10

urmet domus 1067 Specifications

General

Brand	urmet domus
Model	1067
Category	Antenna
Language	English