ENGINE SPECIFICATIONS
2-2
EAS20014
ENGINE SPECIFICATIONS
Engine
Combustion cycle 4-stroke
Cooling system Liquid cooled
Valve train DOHC
Displacement 847 cm³
Cylinder arrangement Inline
Number of cylinders 3-cylinder
Bore ï‚´ stroke 78.0 ï‚´ 59.1 mm (3.07 ï‚´ 2.33 in)
Compression ratio 11.5 : 1
Compression pressure 1331–1713 kPa/680 r/min (13.3–17.1
kgf/cm²/680 r/min, 189.3–243.7 psi/680 r/min)
Starting system Electric starter
Fuel
Recommended fuel Premium unleaded gasoline (Gasohol [E10] ac-
ceptable) (MT09TRA_EUR/HRV/TUR/ZAF,
MT09TRAH)
Unleaded gasoline only. Minimum research oc-
tane number 95 (MT09TRA_RUS)
Fuel tank capacity 18 L (4.8 US gal, 4.0 Imp.gal)
Fuel reserve amount 2.6 L (0.69 US gal, 0.57 Imp.gal)
Engine oil
Recommended brand YAMALUBE
SAE viscosity grades 10W-40
Recommended engine oil grade API service SG type or higher, JASO standard
MA
Lubrication system Wet sump
Engine oil quantity
Oil change 2.40 L (2.54 US qt, 2.11 Imp.qt)
With oil filter removal 2.70 L (2.85 US qt, 2.38 Imp.qt)
Quantity (disassembled) 3.40 L (3.59 US qt, 2.99 Imp.qt)
Oil filter
Oil filter type Cartridge
Oil pump
Inner-rotor-to-outer-rotor-tip clearance Less than 0.120 mm (0.0047 in)
Limit 0.20 mm (0.0079 in)
Outer-rotor-to-oil-pump-housing clearance 0.09–0.19 mm (0.0035–0.0075 in)
Limit 0.21 mm (0.0083 in)
Oil pressure 230.0 kPa/5000 r/min (2.30 kgf/cm²/5000 r/min,
33.4 psi/5000 r/min)
Relief valve operating pressure 740.0 kPa (7.40 kgf/cm², 107.3 psi)
Cooling system
Coolant quantity
Radiator (including all routes) 1.93 L (2.04 US qt, 1.70 Imp.qt)
Coolant reservoir (up to the maximum level
mark)
0.25 L (0.26 US qt, 0.22 Imp.qt)
Radiator cap valve opening pressure 93.3–122.7 kPa (0.93–1.23 kgf/cm², 13.5–17.8
psi)
To Next Page
Loading...
Need help?
General
