ABB Advant Controller 450 User Manual

$GYDQW

&RQWUROOHU8VHU¶V*XLGH
6HFWLRQ 3URFHVV,QWHUIDFH
3BSE 002 415R701 Rev A 1-59
• Each board has built-in reference channels for automatic calibration and testing.
• The data base is updated by scanning, with cycle times normally selected from the range
100 ms to 600 s.
• The suppression frequency is selectable from 20, 30, 50 and 60 Hz.
• The current generators for sensors deliver 2.5 mA, in accordance with DIN 43760.
• Optional software filtering and deadband limits for updating can be selected.
$QDORJ,QSXWIRU7KHUPRFRXSOH0DLQ3RLQWV
• Thermocouple inputs are available for different sensor types.
• Each board has built-in reference channels for automatic calibration and testing.
• The data base is updated by scanning, with cycle times normally selected from the range
100 ms to 600 s.
• Optional software filtering and deadband limits for updating can be selected.
$QDORJ,QSXW%RDUG7\SHV
Table 1-15 presents available analog input boards.
7DEOH $QDORJ,QSXW%RDUGV
%RDUGW\SH 'HVFULSWLRQ &RQQHFWLRQXQLW &DEOH
DSAI 130 16 channels, differential inputs, resolution
12 bits + sign,
0 to ±10 V, 0 to ±5 V,
0 to ±2.5 V, 0 to ±1.25 V or
0 to ±20 mA, 0 to ±10 mA, 0 to ±5 mA,
4 to 20 mA (elevated zero obtained by SW)
shunt 250 Ω 0.1%, CMV 100 V
DSTA 131 DSTK 221L3
DSAI 130A 16 channels, differential inputs, resolution
12 bits + sign,
0 to ±10 V, 0 to ±5 V,
0 to ±2.5 V, 0 to ±1.25 V or
0 to ±20 mA, 0 to ±10 mA, 0 to ±5 mA,
4 to 20 mA (elevated zero obtained by SW)
shunt 250 Ω 0.1%, CMV 50 V
DSTA 131 DSTK 221L3
DSAI 130 Eight differential and eight directly grounded inputs
(single ended), transducer supply fused channel by
channel, resolution 12 bits,
0 to ±10 V, 0 to ±5 V,
0 to ±2.5 V, 0 to ±1.25 V or
0 to ±20 mA, 0 to ±10 mA, 0 to ±5 mA,
4 to 20 mA (elevated zero obtained by SW)
shunt 250 Ω 0.1%, CMV 100 V
DSTA 133 DSTK 221L3

ABB Advant Controller 450 Specifications

General

Brand	ABB
Model	Advant Controller 450
Category	Controller
Language	English