SIP User's Manual 130 Document #: LTRT-65412
MP-11x & MP-124
3.3.4.8 Routing Tables
The Routing Tables submenu allows you to configure call routing rules. This submenu
includes the following page items:
Routing General Parameters (refer to ''Configuring Routing General Parameters'' on
page 130)
Tel to IP Routing (refer to ''
Configuring the Tel to IP Routing Table'' on page 131)
IP to Trunk G
roup Routing (refer to ''Configuring the IP to Trunk Group Routing'' on
page 135)
Internal DNS
Table (refer to ''Configuring the Internal DNS Table'' on page 138)
Internal SRV
Table (refer to ''Configuring the Internal SRV Table'' on page 139)
Alternative Routing (refer t
o ''Configuring Reasons for Alternative Routing'' on page
140)
3.3.4.8.1 Configuring General Routing Parameters
The 'Routing General Parameters' page allows you to configure the general routing
parameters. For a description of these parameters, refer to “Configuration Parameters
Reference” on page 213.
¾ To configure the general routing parameters:
1. Open the 'Routing General Parameters' page (Configuration tab > Protocol
Configuration menu > Routing Tables submenu > Routing General Parameters
page item).
Figure 3-76: Routing General Parameters Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 167.
To Next Page
Loading...
Need help?
General
