SIP User's Manual 156 Document #: LTRT-65412
MP-11x & MP-124
3.3.5.3 Configuring FXO Parameters
The 'FXO Settings' page allows you to configure the device's specific FXO parameters. For
a description of these parameters, refer to “Configuration Parameters Reference” on page
213.
Note: The 'FXO Settings' page is available only for FXO interfaces.
¾ To configure the FXO parameters:
1. Open the 'FXO Settings' page (Configuration tab > Advanced Applications menu >
FXO Settings page item).
Figure 3-92: FXO Settings Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 167.
To Next Page
Loading...
Need help?
General
