SIP User's Manual 64 Document #: LTRT-65412
MP-11x & MP-124
3.3.1.3 Configuring the NFS Settings
Network File System (NFS) enables the device to access a remote server's shared files and
directories, and to handle them as if they're located locally. You can configure up to five
different NFS file systems. As a file system, the NFS is independent of machine types,
operating systems, and network architectures. NFS is used by the device to load the cmp,
ini, and auxiliary files, using the Automatic Update mechanism (refer to the Product
Reference Manual). Note that an NFS file server can share multiple file systems. There
must be a separate row for each remote file system shared by the NFS file server that
needs to be accessed by the device.
¾ To add remote NFS file systems:
1. Open the 'Application Settings' page (refer to ''Configuring the Application Settings'' on
page 62).
2. Under the NFS Settings group, click the NFS Table
button; the 'NFS Settings'
page appears.
Figure 3-39: NFS Settings Page
3. In the 'Add' field, enter the index number of the remote NFS file system, and then click
Add; an empty entry row appears in the table.
4. Configure the NFS parameters according to the table below.
5. Click the Apply button; the remote NFS file system is immediately applied, which can
be verified by the appearance of the 'NFS mount was successful' message in the
Syslog server.
6. To save the changes to flash memory, refer to ''Saving Configuration'' on page 167.
Notes:
• To avoid terminating current calls, a row must not be deleted or modified
while the device is currently accessing files on that remote NFS file
system.
• The combination of 'Host Or IP' and 'Root Path' must be unique for each
row in the table. For example, the table must include only one row with a
Host / IP of 192.168.1.1 and Root Path of /audio.
• For an explanation on configuring Web interface tables, refer to ''Working
with Tables'' on page 37.
• You can also configure the NFS table using the ini file table parameter
NFSServers (refer to ''NFS Parameters'' on page 222).
Table 3-7: NFS Settings Parameters
Parameter Description
Index The row index of the remote file system.
The valid range is 0 to 4.
Host Or IP The domain name or IP address of the NFS server. If a domain name is
provided, a DNS server must be configured.
To Next Page
Loading...
Need help?
General
