SIP User's Manual 176 Document #: LTRT-65412
MP-11x & MP-124
¾ To load (or restore) the ini file:
1. To load the ini file to the device, perform the following:
a. Click the Browse button, navigate to the folder in which the ini file is located,
select the file, and then click Open; the name and path of the file appear in the
field beside the Browse button.
b. Click the Load INI File button, and then at the prompt, click OK; the device
uploads the ini file and then resets (from the cmp version stored on the flash
memory). Once complete, the 'Enter Network Password' dialog box appears,
requesting you to enter your user name and password.
3.5 Status & Diagnostics Tab
The Status & Diagnostics tab on the Navigation bar displays menus in the Navigation tree
related to device operating status and diagnostics. These menus include the following:
Status & Diagnostics (refer to ''Status & Diagnostics'' on page 176)
Gateway Statistics (refer to ''Gateway Statistics'' on p
age 181)
3.5.1 Status & Diagnostics
The Status & Diagnostics menu is used to view and monitor the device's channels, Syslog
messages, hardware and software product information, and to assess the device's statistics
and IP connectivity information. This menu includes the following page items:
Message Log (refer to “Viewing the Device’s Syslog Messages” on page 176)
Ethernet Port
Information (refer to ''Viewing Ethernet Port Information'' on page 178)
IP Interface Status (refer to
''Viewing Active IP Interfaces'' on page 178)
Device Information (refer
to ''Viewing Device Information'' on page 178)
Perform
ance Statistics (refer to ''Viewing Performance Statistics'' on page 179)
Active Alarms (refe
r to ''Viewing Active Alarms'' on page 180)
To Next Page
Loading...
Need help?
General
