SIP User's Manual 76 Document #: LTRT-65412
MP-11x & MP-124
3.3.3.2 Configuring the Web and Telnet Access List
The 'Web & Telnet Access List' page is used to define up to ten IP addresses that are
permitted to access the device's Web and Telnet interfaces. Access from an undefined IP
address is denied. If no IP addresses are defined, this security feature is inactive and the
device can be accessed from any IP address.
The Web and Telnet Access List can also be defined using the ini file parameter
WebAccessList_x (refer to ''Web and Telnet Parameters'' on page 229).
¾ To add authorized IP addresses for Web and Telnet interfaces access:
1. Open the 'Web & Telnet Access List' page (Configuration tab > Security Settings
menu > Web & Telnet Access List page item).
Figure 3-49: Web & Telnet Access List Page - Add New Entry
2. To add an authorized IP address, in the 'Add a New Authorized IP Address' field, enter
the required IP address, and then click Add New Address; the IP address you
entered is added as a new entry to the 'Web & Telnet Access List' table.
Figure 3-50: Web & Telnet Access List Table
Notes:
• The first authorized IP address in the list must be your PC's (terminal) IP
address; otherwise, access from your PC is denied.
• Only delete your PC's IP address last from the 'Web & Telnet Access List'
page. If it's deleted before the last, access from your PC is denied after
it's deleted.
To Next Page
Loading...
Need help?
General
