Version 5.8 473 September 2009
SIP User's Manual 11. SIP Software Package
11 SIP Software Package
The table below lists the device's standard SIP software package.
Table 11-1: Software Package
File Name Description
Ram.cmp file
MP124_SIP_xxx.cmp Image file containing the software for the MP-124/FXS device.
MP118_SIP_xxx.cmp Common Image file Image file containing the software for MP-11x/FXS
devices.
ini files
SIPgw_MP124.ini Sample ini file for MP-124/FXS device.
SIPgw_fxs_MP118.ini Sample ini file for MP-118/FXS devices.
SIPgw_fxs_MP114.ini Sample ini file for MP-114/FXS devices.
SIPgw_fxs_MP112.ini Sample ini file for MP-112/FXS devices.
MP1xx_Coeff_FXS.dat Telephony interface configuration file for MediaPack/FXS devices.
Usa_tones_xx.dat Default loadable Call Progress Tones dat file
Usa_tones_xx.ini Call Progress Tones ini file (used to create dat file)
Utilities
DConvert TrunkPack Downloadable Conversion Utility - to create Call Progress
Tones files
ACSyslog Syslog server
BootP BootP/TFTP configuration utility
CPTWizard Call Progress Tones Wizard
MIB Files MIB library for SNMP browser
Note: The device is supplied with a cmp file pre-installed on its flash memory.
However, if you are an AudioCodes registered customer, you can obtain the
latest cmp version files (as well as documentation and other software such as
the ini and MIB files, and Utilities) from AudioCodes Web site at
www.audiocodes.com/support (customer registration is performed online at
this Web site). If you are not a direct customer of AudioCodes, please contact
the AudioCodes’ Distributor and Reseller from whom this product was
purchased.
To Next Page
Loading...
Need help?
General
