Set a Custom Size Roll Width
By specifying the roll paper width with a value, you can use roll paper with a width that cannot be selected in
Roll Paper Width.
The procedure for setting custom size roll width is described below.
1. Open the printer driver setup window1.
2.
Select the paper source
2.
From the Paper Source list on the Page Setup tab, select Roll Paper.
3.
Select paper roll width
3.
In Roll Paper Width, select User-defined1 (XXXX) / User-defined2 (XXXX).
The Custom Size Settings dialog box opens.
4.
Set paper roll width
4.
Specify Units, enter the roll width you want to use, and then click OK.
138
To Next Page
Loading...
Need help?
General