Replacing the Cutter Blade
Compatible Cutter Blade
For details on compatible cutter blade, see Cutter Blade.
How to Replace Cutter Blade
Important
• The cutter blade can not be replaced if there is paper in the moving range of the cutter. Remove the
paper.
1.
Select (Setup) on HOME screen.
1.
2.
Select Maintenance.
2.
3. Select Replace cutter blade unit.3.
A confirmation message appears.
4. Select Yes.4.
The carriage moves and after it stops moving, instructions for the cutter blade replacement procedure
appear on the touch screen.
5.
If cutter blade is dirty, use damp cloth that you have wrung out completely to wipe it
5.
clean.
Important
• Do not use tissue paper, paper towels, rough-textured cloth, or similar materials for cleaning so
as not to scratch the surface.
6.
Turn hex screw with hex wrench until loose.
6.
603
To Next Page
Loading...
Need help?
General