Cut to standard size and Auto rotation and Enlarge/Reduce (Fit
paper size)
When Cut to standard size, Auto rotation, and Enlarge/Reduce (Fit paper size) are all specified, first
suitable standard size candidates are determined based on the roll paper loaded on the printer.
Next, it decides the optimum standard size and rotation direction from the matching result between the data
to which Auto rotation is applied and all candidate sizes.
Finally, Enlarge/Reduce (Fit paper size) process is performed according to the decided standard size.
SMALL IMAGE EXAMPLE
When A3 width roll paper is loaded, A4 landscape is chosen as the optimal standard size based on the
roll paper width and image size.
Next, Auto rotation is performed in accordance with the A4 landscape. Finally, the image is enlarged and
printed to match A4 size paper.
Print data (image drawing range)
A. Virtual area for A4 size
Since the image fits on A4 size paper, A4 landscape is chosen as the standard size.
• Image after auto rotation•
• Printed image after fit to paper•
434
To Next Page
Loading...
Need help?
General