Switching the Paper Source to Match the Purpose
This printer has two paper sources: Roll and Cut Sheet.
You can facilitate printing by selecting a paper source setting that matches your media type or purpose.
The procedure for setting paper source is as follows:
1. Open the printer driver setup window1.
2.
Select the media type
2.
Select the type of paper loaded in the printer from the Media Type list on the Main tab.
If Auto (Use Printer Settings) is selected, the paper configured in printer settings is printed.
3.
Select the paper source
3.
From the Paper Source list on the Page Setup tab, select the paper source that matches your purpose.
Roll Paper
Feeds paper using roll paper.
Cut Sheet
Feeds paper using the cut sheet.
4.
Complete the setup
4.
Click OK.
When you execute print, the printer uses the specified paper source to print the data.
171
To Next Page
Loading...
Need help?
General