Cisco 7941G Administration Guide

DescriptionState
Cisco Unified Communications Manager server to which the phone switches
if the current server becomes unavailable
Standby
No current connection to this Cisco Unified Communications Manager
server
Blank
An option may also display one of more of the designations or icons shown in the following table.
Table 14: Cisco Unified Communications Manager Server Designations
DescriptionDesignation
Indicates a Survivable Remote Site Telephony router that can provide
Cisco Unified Communications Manager functionality with a limited
feature set. This router assumes control of call processing if all other
Cisco Unified Communications Manager servers become unreachable.
The SRST Cisco Unified Communications Manager always appears last
in the list of servers, even if it is active.
For more information, see the “Survivable Remote Site Telephony
Configuration” chapter in the Cisco Unified Communications Manager
Administration Guide.
SRST
Indicates that the phone was unable to register with a Cisco Unified
Communications Manager listed in its configuration file, and it registered
with the TFTP server instead.
TFTP
Appears as a shield and indicates that the call is from a trusted device,
and that the connection to Cisco Unified Communications Manager is
authenticated. For more information about authentication, see the Cisco
Unified Communications Manager Security Guide.
(Authentication icon)
Appears as a padlock and indicates that the call is from a trusted device,
and that the connection to Cisco Unified Communications Manager is
authenticated and encrypted. For more information about authentication
and encryption, see the Cisco Unified Communications Manager Security
Guide.
The Encryption icon is also displayed when a Cisco Unified IP Phone
is configured as protected. For more information about protected calls,
see the Cisco Unified Communications Manager Security Guide.
Protected calls are not authenticated.
(Encryption icon)
SIP Configuration Menu for SIP Phones
The SIP Configuration menu contains these sub-menus:
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
85
Cisco Unified IP Phone Settings
SIP Configuration Menu for SIP Phones

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g