Cisco 7941G Administration Guide

To ChangeDescriptionOption
Display only—cannot configure.
The value is left blank because it is not
applicable to SIP Phones that are using Cisco
Unified Communications Manager.
Proxy Port
Display only—cannot configure.
Displays if the line is part of a shared line (Yes)
or not (No).
Shared Line
Related Topics
Display Settings Menu, on page 60
Device Configuration Menu, on page 84
Call Preferences Menu for SIP Phones
The Call Preferences menu displays settings that relate to the settings for the call preferences on the SIP Phone.
The following table describes the options in this menu.
Table 17: Call Preferences Menu Options
To ChangeDescriptionOption
From Cisco Unified Communications
Manager Administration, choose Device
> Device Settings > SIP Profile .
Indicates whether caller ID
blocking is enabled (Yes) or
disabled (No) for the phone.
Caller ID Blocking
From Cisco Unified Communications
Manager Administration, choose Device
> Device Settings > SIP Profile .
Indicates whether anonymous call
block is enabled (Yes) or disabled
(No) for the phone.
Anonymous Call Block
Use Cisco Unified Communications
Manager Administration to modify.
Displays a sub-menu that indicates
whether call waiting is enabled
(Yes) or disabled (No) for each
line.
Call Waiting Preferences
From Cisco Unified Communications
Manager Administration, choose Device
> Device Settings > SIP Profile .
Indicates whether the call hold
ringback feature is enabled (Yes)
or disabled (No) for the phone.
Call Hold Ringback
From Cisco Unified Communications
Manager Administration, choose Device
> Device Settings > SIP Profile .
Indicates whether stutter message
waiting is enabled (Yes) or
disabled (No) for the phone.
Stutter Msg Waiting
Use Cisco Unified Communications
Manager Administration to modify.
Indicates whether BLF for call
logs is enabled (Yes) or disabled
(No) for the phone.
Call Logs BLF Enabled
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
88
Cisco Unified IP Phone Settings
Call Preferences Menu for SIP Phones

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g