Cisco 7941G Administration Guide

Telephony Features Available for Cisco Unified IP Phone
After you add Cisco Unified IP Phones to Cisco Unified Communications Manager, you can add functionality
to the phones. The following table includes a list of supported telephony features, many of which you can
configure using Cisco Unified Communications Manager Administration. The Reference column lists
Cisco Unified Communications Manager and other documentation that contains configuration procedures
and related information.
For information about using most of these features on the phone, see Cisco Unified IP Phone 7941G, 7941G-GE,
7942G, 7961G, 7961G-GE, and 7962G User Guide.
Cisco Unified Communications Manager Administration also provides service parameters that you can
use to configure various telephony functions. For more information about service parameters and the
functions that they control, see Cisco Unified Communications Manager Administration Guide.
Note
Table 34: Telephony features for the Cisco Unified IP Phone
Configuration referenceDescriptionFeature
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide,
“Cisco Unified IP Phone
Configuration” chapter
•
Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phones” chapter
Allows users to speed dial a phone number by entering an
assigned index code (1 to 99) on the phone keypad.
You can use Abbreviated Dialing while on hook
or off hook.
Note
Users assign index codes from the User Options web pages.
Abbreviated Dialing
For more information, see Cisco Unified IP
Phone Guide, “Basic Call Handling”
chapter.
Creates a conference by joining together existing calls that
are on a single phone line.
Add Select to Join
(Cisco Unified IP Phones
7941G, 7941G-GE, 7961G,
and 7961G-GE.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
120
Features, Templates, Services, and Users
Telephony Features Available for Cisco Unified IP Phone

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g