To ChangeDescriptionOption
Set IPv6 TFTP Server 2 Field, on
page 83
(Optional) The backup IPv6 TFTP server
that the phone uses if the primary IPv6
TFTP server is unavailable.
Before making changes to the
Alternate TFTP or IPv6 TFTP
servers, you must first unlock the
CTL or ITL file on the phone.
Note
When the phone looks for its TFTP server,
it gives precedence to manually assigned
TFTP servers, regardless of the protocol.
If your configuration includes both IPv6
and IPv4 TFTP servers, the phone
prioritizes the order that it looks for its
TFTP server by giving priority to manually
assigned IPv6 TFTP servers and IPv4
TFTP servers. The phone looks for its
TFTP server in the following order:
1
Manually assigned IPv6 TFTP Servers
2
Manually assigned IPv4 TFTP Servers
3
DHCPv6 assigned TFTP Servers
4
DHCP assigned TFTP Servers
For information about the CTL or ITL file,
see Cisco Unified Communications
Manager Security Guide. For information
about unlocking the CTL file, see Unlock
CTL and ITL Files, on page 110.
IPv6 TFTP Server 2
(SCCP phones only)
Set IPv4 Configuration Fields
Procedure
Step 1
Unlock network configuration options.
Step 2
Scroll to IPv4 Configuration and press the Select softkey.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
74
Cisco Unified IP Phone Settings
Set IPv4 Configuration Fields