Cisco 7941G Administration Guide

Security Configuration Menu
The Security Configuration that you access directly from the Settings menu provides information about various
security settings. This menu also provides access to the Trust List menu. The Trust List menu indicates if the
CTL file or the ITL file is installed on the phone.
The following table describes the options in this menu.
The phone also has a Security Configuration menu that you access from the Device menu. For information
about the security options on that menu, see Security Configuration Menu, on page 99.
Note
Table 27: Security Menu Settings
To ChangeDescriptionOption
For more information, see Control
Web Page Access, on page 193.
Indicates whether web access is enabled
(Yes) or disabled (No) for the phone.
Web Access Enabled
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Displays the security mode that is set for
the phone.
Security Mode
For information about how to manage
the MIC for your phone, see “Using
the Certificate Authority Proxy
Function” chapter in Cisco Unified
Communications Manager Security
Guide.
Indicates whether a manufacturing
installed certificate used for the security
features is installed on the phone (Yes) or
is not installed on the phone (No).
MIC
For information about how to manage
the LSC for your phone, see “Using
the Certificate Authority Proxy
Function” chapter in Cisco Unified
Communications Manager Security
Guide.
Indicates whether a locally significant
certificate used for the security features is
installed on the phone (Yes) or is not
installed on the phone (No).
LSC
For more information about this file,
see “Configuring the Cisco CTL
Client” chapter in Cisco Unified
Communications Manager Security
Guide.)
If a CTL file is installed on the phone,
also provides access to the CTL File
screen. For more information, see CTL
File Submenu, on page 109.
Displays the MD5 hash of the certificate
trust list (CTL) file that is installed in the
phone, and provides access to the CTL File
submenu. If no CTL file is installed on the
phone, this field displays No. If security
is configured for the phone, the CTL file
installs automatically when the phone
reboots or resets.
CTL File
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
108
Cisco Unified IP Phone Settings
Security Configuration Menu

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g