Cisco 7941G Administration Guide

Step 2
Enter the appropriate search criteria and click Find.
Step 3
Click Standard CCM End Users. The User Group Configuration page for the Standard CCM End Users
displays.
Step 4
Click Add End Users to Group. The Find and List Users window displays.
Step 5
Use the Find User drop-down list to find the end users that you want to add and click Find.
A list of end users that matches your search criteria displays.
Step 6
In the list of records that displays, click the check box next to the users that you want to add to this user group.
If the list comprises multiple pages, use the links at the bottom to see more results.
The list of search results does not display end users that already belong to the user group.Note
Step 7
Click Add Selected.
Associate Phones with Users
To associate appropriate phones with the user, perform these steps:
Procedure
Step 1
From Cisco Unified Communications Manager Administration, choose User Management > End User.
The Find and List Users window displays.
Step 2
Enter the appropriate search criteria and click Find.
Step 3
In the list of records that display, click the link for the user.
Step 4
Click Device Association.
The User Device Association window displays.
Step 5
Enter the appropriate search criteria and click Find.
Step 6
Choose the device that you want to associate with the end user by checking the box to the left of the device.
Step 7
Click Save Selected/Changes to associate the device with the end user.
User Options Web Pages Options
Most options that are on the User Options web pages appear by default. However, the following options must
be set by the system administrator using the Enterprise Parameters Configuration settings in Cisco Unified
Communications Manager Administration:
•
Show Ring Settings
•
Show Line Text Label Settings
•
Show Call Forwarding
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
152
Features, Templates, Services, and Users
User Options Web Pages Options

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g