Cisco 7941G Administration Guide

To ChangeDescriptionOption
Use Cisco Unified
Communications Manager
Administration, choose Device >
Phone > Phone Configuration.
Indicates whether the user can configure
the Wideband Handset option in the phone
user interface.
Values:
•
Enabled: The user can configure the
Wideband Handset option in the
Audio Preferences menu on the phone
(choose > User Preferences >
Audio Preferences > Wideband
Handset).
•
Disabled: The value of the Wideband
Handset option in Cisco Unified
Communications Manager
Administration gets used (see Media
Configuration Menu, on page 94).
Default: Enabled
Wideband Handset UI
Control
From Cisco Unified
Communications Manager
Administration, choose Device >
Phone > Phone Configuration.
Indicates whether the user can configure
custom ring tones and wallpaper images.
Personalization
From Cisco Unified
Communications Manager
Administration, choose Device >
Phone > Phone Configuration.
Indicates whether the Single Button Barge
feature is enabled for the phone.
Default: Disabled.
Single Button Barge
From Cisco Unified
Communications Manager
Administration, choose Device >
Phone > Phone Configuration.
Indicates whether the phone will use Enbloc
dialing. If Enabled, the phone will use
Enbloc dialing when possible. If Disabled,
the phone will not use Enbloc dialing. You
should disable Enbloc dialing if either
Forced Authorization Codes (FAC) or
Client Matter Codes (CMC) dialing is being
used.
Default: Enabled
Enbloc Dialing (SCCP
only)
Media Configuration Menu
The Media Configuration menu displays whether the headset, wireless headset, speakerphone, and video
capability are enabled on the phone. This menu also displays options for recording tones that the phone may
play to indicate that a call may be recorded. The following table describes the options on this menu.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
94
Cisco Unified IP Phone Settings
Media Configuration Menu

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g