•
Enable: Select the check box.
Step 4
Click Save.
You can add, update, or delete service parameters as needed as described in “IP Phone Service Parameter”
chapter in the Cisco Unified Communications Manager Administration Guide.
If you change the service URL, remove an IP phone service parameter, or change the name of a phone
service parameter for a phone service to which users are subscribed, you must click Update
Subscriptions to update all currently subscribed users with the changes, or users must resubscribe
to the service to rebuild the correct URL.
Note
Change Phone Button Template for PAB or Fast Dial
To modify a phone button template for PAB or Fast Dial, perform these steps:
Procedure
Step 1
From Cisco Unified Communications Manager Administration, choose Device > Device Settings > Phone
Button Template.
Step 2
Click Find.
Step 3
Select the phone model.
Step 4
Click Copy, enter a name for the new template, and then click Save.
The Phone Button Template Configuration window opens.
Step 5
Identify the button you would like to assign, and select Service URL from the Features drop-down list box
associated with the line.
Step 6
Click Save to create a new phone button template using the service URL.
Step 7
Choose Device > Phone and open the Phone Configuration window for the phone.
Step 8
Select the new phone button template from the Phone Button Template drop-down list box.
Step 9
Click Save to store the change and then click Apply Config to implement the change.
The phone user can now access the User Options pages and associate the service with a button on the phone.
For additional information on IP phone services, see the Cisco Unified Communications Manager Administration
Guide, “IP Phone Services Configuration” chapter. For more information on configuring line buttons, see the
Cisco Unified Communications Manager Administration Guide, “Cisco Unified IP Phone Configuration”
chapter, “Configuring Speed-Dial Buttons” section.
Softkey Templates
Using Cisco Unified Communications Manager Administration, you can manage softkeys associated with
applications that are supported by the Cisco Unified IP Phone 7962G and 7942G. Cisco Unified
Communications Manager supports two types of softkey templates: standard and nonstandard. Standard
softkey templates include Standard User, Standard Feature, Standard Assistant, Standard Manager, and
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
148
Features, Templates, Services, and Users
Change Phone Button Template for PAB or Fast Dial
To Next Page
Loading...
Need help?
General
Weight and Dimensions
