Cisco 7941G Administration Guide

The Cisco Unified IP Phones support wideband headsets.Note
Audio Quality
Beyond the physical, mechanical and technical performance, the audio portion of a headset must sound good
to the user and to the party on the far end. Sound quality is subjective and Cisco cannot guarantee the
performance of any headsets. However, a variety of headsets from leading headset manufacturers have been
reported to perform well with Cisco Unified IP Phones.
For additional information, see the Headsets for Cisco Unified IP Phones and Desktop Clients page on
Cisco.com.
Headset Connection
To connect a wired headset to the Cisco Unified IP Phone, plug it into the Headset port on the back of the
phone. Press the Headset button on the phone to place and answer calls using the headset.
You can use the wired headset with all of the features on the Cisco Unified IP Phone, including the Volume
and Mute buttons. Use these buttons to adjust the ear piece volume and to mute the speech path from the
headset microphone.
See the wireless headset documentation for information about connecting the headset and using the features.
Disable Headset
You can disable the headset by using Cisco Unified Communications Manager Administration.
To disable the headset, perform the following steps:
Procedure
Step 1
Choose Device > Phone and locate the phone you want to modify.
Step 2
In the Phone Configuration window, check the Disable Speakerphone and Headset check box.
Step 3
Click Apply.
Wireless Headset
By default, the Wireless Headset Hookswitch Control option is disabled. You can enable the option in the
Cisco Unified Communications Manager Administration application.
See the wireless headset documentation for information about connecting the headset and using the features.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
47
Cisco Unified IP Phones Installation
Headset

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g