Related Topics
Cisco Unified Communications Manager Phone Addition Methods, on page 38
Set Up Cisco Unified IP Phones in Cisco Unified Communications Manager
The following steps provide an overview and checklist of configuration tasks for the Cisco Unified IP Phones
in Cisco Unified Communications Manager Administration. The steps present a suggested order to guide you
through the phone configuration process. Some tasks are optional, depending on your system and user needs.
For detailed procedures and information, see the sources in the steps.
Procedure
Step 1
Gather the following information about the phone:
•
Phone Model
•
MAC address
•
Physical location of the phone
•
Name or user ID of phone user
•
Device pool
•
Partition, calling search space, and location information
•
Number of lines and associated directory numbers (DNs) to
assign to the phone
•
Cisco Unified Communications Manager user to associate with
the phone
•
Phone usage information that affects phone button template, softkey template, phone features, IP Phone
services, or phone applications
For more information, see:
• Cisco Unified Communications Manager System Guide, “Cisco Unified IP Phone” chapter
•
Telephony Features Available for Cisco Unified IP Phone, on page 120
Step 2
Customize phone button templates (if required).
Changes the number of line buttons, speed-dial buttons, Service URL buttons, or adds a Privacy button to
meet user needs.
You must specify a service URL with an IPv4 address.
For more information, see:
• Cisco Communications Manager Administration Guide, “Phone Button Template Configuration” chapter
•
Phone Button Templates, on page 146
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
24
Cisco Unified IP Phone
Cisco Unified IP Phones Setup in Cisco Unified Communications Manager
To Next Page
Loading...
Need help?
General
Weight and Dimensions
