Status Menu
The Status menu includes theses options, which provide information about the phone and its operation:
•
Status Messages: Displays the Status Messages screen, which shows a log of important system messages.
•
Network Statistics: Displays the Network Statistics screen, which shows Ethernet traffic statistics.
•
Firmware Versions: Displays the Firmware Versions screen, which shows information about the firmware
running on the phone.
•
Expansion Modules: Displays the Expansion Modules screen, which shows information about the
Cisco Unified IP Phone Expansion Module, if connected to the phone.
Display Status Menu
Procedure
Step 1
Press Apps.
Step 2
Select Admin Settings > Status Menu.
Status Messages Screen
The Status Messages screen displays the 10 most recent status messages that the phone has generated. You
can access this screen at any time, even if the phone has not finished starting up. Status Messages, on page
172 describes the status messages that might appear. This table also includes actions you can take to address
errors.
Display Status Messages Screen
To display the Status Messages screen, follow these steps:
Procedure
Step 1
Press Settings.
Step 2
Select Status.
Step 3
Select Status Messages.
Step 4
To remove current status messages, press Clear.
Step 5
To exit the Status Messages screen, press Exit.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
171
Model Information, Status, and Statistics
Status Menu