Cisco 7941G Administration Guide

You can also obtain much of this information directly from a phone. For more information, see Model
Information, Status, and Statistics, on page 169.
For more information about troubleshooting the Cisco Unified IP Phone, see Troubleshooting and Maintenance,
on page 209.
Access Web Page for Phone
To access the web page for a Cisco Unified IP Phone, perform these steps.
If you cannot access the web page, it may be disabled. See Control Web Page Access, on page 193 for
more information.
Note
Procedure
Step 1
Obtain the IP address of the Cisco Unified IP Phone by using one of these methods:
•
Search for the phone in Cisco Unified Communications Manager by choosing DevicePhone. Phones
registered with Cisco Unified Communications Manager display the IP address on the Find and List
Phones window and at the top of the Phone Configuration window.
•
On the Cisco Unified IP Phone, press the Settings button, choose Network Configuration, and then
scroll to the IP Address option.
Step 2
Open a web browser and enter the following URL, where IP_address is the IP address of the Cisco Unified
IP Phone:
http://IP_address or https://IP_address depending on the protocol supported by the Cisco Unified IP Phone.
Phone Web Page Overview
The web page for a Cisco Unified IP Phone includes these topics:
•
Device Information: Displays device settings and related information for the phone.
•
Network Configuration: Displays network configuration information and information about other
phone settings.
•
Network Statistics: Includes the following hyperlinks, which provide information about network traffic:
◦
Ethernet Information: Displays information about Ethernet traffic.
◦
Access (Port): Displays information about network traffic to and from the PC port on the phone.
◦
Network (Port): Displays information about network traffic to and from the network port on the
phone.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
192
Remote Monitoring
Access Web Page for Phone

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g