To ChangeDescriptionOption
For more information, see Trust List
Menu, on page 112.
The Trust List is a top-level menu that
provides submenus for the CTL, ITL, and
Signed Configuration files.
The CTL File submenu displays the
contents of the CTL file. The ITL File
submenu displays contents of the ITL file.
The CTL File and ITL File submenus also
display the MD5 hash of the file. The MD5
hash value from the phone can be
compared with the MD5 hash value of the
file from the TFTP server to verify if the
correct file is installed on the phone.
The Signed Configuration File submenu
displays the SRST certificate that is
installed via the authenticated digitally
signed configuration file.
Trust List
For more information, see the Cisco
Unified Communications Manager
Security Guide, “Virtual Private
Network Configuration” chapter.
Allows you to configure VPN
configuration for this phone.
Supported only for the Cisco Unified IP
Phone 7942G, 7945G, and 7962G.
VPN Configuration
See 802.1X Authentication and
Status, on page 113.
Allows you to enable 802.1X
authentication for this phone.
802.1X Authentication
Display only—Cannot configure.
Displays real-time status progress of the
802.1X authentication transaction.
802.1X Authentication
Status
CTL File Submenu
The CTL File screen includes the options described in the following table.
If a CTL file is installed on the phone, you can access the CTL File submenu by pressing the Settings button
and choosing Security Configuration > Trust List.
To exit the CTL File submenu, press Exit.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
109
Cisco Unified IP Phone Settings
CTL File Submenu