Cisco 7941G Administration Guide

•
Device Logs: Includes the following hyperlinks, which provide information that you can use for
troubleshooting:
•
Console Logs: Includes hyperlinks to individual log files.
•
Core Dumps: Includes hyperlinks to individual dump files.
•
Status Messages: Displays up to the 10 most recent status messages that the phone has generated
since it was last powered up.
•
Debug Display: Displays debug messages that might be useful to Cisco TAC if you require
assistance with troubleshooting.
•
Streaming Statistics: Includes the following hyperlinks
◦
Stream 1, Stream 2, Stream 3, Stream 4, or Stream 5: Display a variety of streaming statistics.
Related Topics
Device Information Area, on page 194
Network Configuration Area, on page 196
Network Statistics Area, on page 200
Device Logs Area, on page 203
Streaming Statistics, on page 204
Control Web Page Access
For security purposes, you may choose to prevent access to the web pages for a phone. If you do so, you will
prevent access to the web pages that are described in this chapter and to the Cisco Unified Communications
Manager User Options web pages.
You can enable or disable access to the web pages for an individual phone, a group of phones, or to all phones
in the system.
To enable or disable access to the web pages for all phones on the system, choose System > Enterprise
Parameters and select Enabled or Disabled from the Web Access drop-down menu.
To enable or disable access to the web pages for a group of phones, choose Device > Device Settings >
Common Phone Profile to create a new phone profile or to update an existing phone profile, select Enabled
or Disabled from the Web Access drop-down menu and select the common phone profile when you configure
your phone.
To enable or disable access to the web pages for a phone, follow these steps from Cisco Unified
Communications Manager Administration.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
193
Remote Monitoring
Control Web Page Access

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g