Cisco 7941G Administration Guide

Static IP Address Setting Errors
Problem
The static IP address assigned to the phone may be incorrect.
Solution
If the phone has been assigned a static IP address, verify that you have entered the correct settings.
Voice VLAN Setup Errors
Problem
If the Cisco Unified IP Phone appears to reset during heavy network usage (for example, following extensive
web surfing on a computer connected to same switch as phone), it is likely that you do not have a voice VLAN
configured.
Solution
Isolating the phones on a separate auxiliary VLAN increases the quality of the voice traffic.
Phones Have Not Been Intentionally Reset
Problem
If you are not the only administrator with access to Cisco Unified Communications Manager, you should
verify that no one else has intentionally reset the phones.
Solution
You can check whether a Cisco Unified IP Phone received a command from Cisco Unified Communications
Manager to reset by pressing the Applications Menu button on the phone and choosing Settings > Status >
Network Statistics. If the phone was recently reset one of these messages appears:
•
Reset-Reset: Phone received a Reset-Reset request from Cisco Unified Communications Manager
Administration.
•
Reset-Restart: Phone received a Reset-Restart request from Cisco Unified Communications Manager
Administration.
DNS or Other Connectivity Errors
Problem
The phone reset continues and you suspect DNS or other connectivity issues.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
215
Troubleshooting and Maintenance
Cisco Unified IP Phone Resets Unexpectedly

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g