Cisco 7941G Administration Guide

Set PC VLAN Field
Procedure
Step 1
Unlock network configuration options.
Step 2
Make sure the Admin VLAN ID option is set.
Step 3
Scroll to the PC VLAN option.
Step 4
Press Edit.
Step 5
Enter a new PC VLAN setting.
Step 6
Press Validate.
Step 7
Press Save
Set DHCP Field
Procedure
Step 1
Unlock network configuration options.
Step 2
Scroll to the DHCP option and press No to disable DHCP, or press Yes to enable DHCP.
Step 3
Press Save.
Set IP Address Field
Procedure
Step 1
Unlock network configuration options.
Step 2
Set the DHCP option to No.
Step 3
Scroll to the IP Address option, press Edit and enter a new IP Address.
Step 4
Press Validate and Save.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
77
Cisco Unified IP Phone Settings
Set PC VLAN Field

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g