Standard Shared Mode Manager. An application that supports softkeys can have one or more standard softkey
templates associated with it. You can modify a standard softkey template by making a copy of it, giving it a
new name, and making updates to that copied softkey template. You can also modify a nonstandard softkey
template.
To configure softkey templates, choose Device > Device Settings > Softkey Template from
Cisco Unified Communications Manager Administration. To assign a softkey template to a phone, use the
Softkey Template field in the Cisco Unified Communications Manager Administration Phone Configuration
page. For more information, see the Cisco Unified Communications Manager Administration Guide and Cisco
Unified Communications Manager System Guide for more information.
The Cisco Unified IP Phones support all the softkeys that are configurable in Cisco Unified Communications
Manager Administration.
Note
Enable Device Invoked Recording
Configure the Device Invoked Recording feature from Cisco Unified Communications Manager Administration.
For more information and detailed instructions, see the “Monitoring and Recording” chapter in the Cisco
Unified Communications Manager Features and Services Guide.
Procedure
Step 1
Set the IP phone Built In Bridge to On.
Step 2
Set Recording Option to Selective Call Recording Enabled.
Step 3
Select the appropriate Recording Profile.
Services Setup
The Services button on the Cisco Unified IP Phones gives users access to Cisco Unified IP Phone Services.
You can also assign services to the programmable buttons on the phone. These services comprise XML
applications that enable the display of interactive content with text and graphics on the phone. Examples of
services include local movie times, stock quotes, and weather reports.
Before a user can access any service,
•
You must use Cisco Unified Communications Manager Administration to configure available services.
•
The user must subscribe to services by using the Cisco Unified Communications Manager User Options
application. This web-based application provides a graphical user interface (GUI) for limited, end user
configuration of IP Phone applications.
Before you set up services, gather the URLs for the sites you want to set up and verify that users can access
those sites from your corporate IP telephony network.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
149
Features, Templates, Services, and Users
Enable Device Invoked Recording
To Next Page
Loading...
Need help?
General
Weight and Dimensions
