Cisco Unified Communications Manager Administration Phone Addition
You can add phones individually to the Cisco Unified Communications Manager database by using
Cisco Unified Communications Manager Administration. To do so, you first need to obtain the MAC address
for each phone.
After you have collected MAC addresses, in Cisco Unified Communications Manager Administration, choose
Device > Phone and click Add New to begin.
For complete instructions and conceptual information about Cisco Unified Communications Manager, see
Cisco Unified Communications Manager Administration Guide and Cisco Unified Communications Manager
System Guide.
Related Topics
Cisco Unified IP Phone MAC Address Determination, on page 42
Add Phones with BAT
Cisco Unified Communications Manager Bulk Administration Tool (BAT), a standard Cisco Unified
Communications Manager application, enables you to perform batch operations, including registration, on
multiple phones.
To add phones using BAT only (not in conjunction with TAPS), you first need to obtain the appropriate MAC
address for each phone.
To add a phone to the Cisco Unified Communications Manager, follow these steps:
Procedure
Step 1
From Cisco Unified Communications Manager, choose Bulk Administration > Phones > Phone Template.
Step 2
Click Add New.
Step 3
Choose a Phone Type and click Next.
Step 4
Enter the details of phone specific parameters such as Device Pool, Phone Button Template, Device Security
Profile.
Step 5
Click Save.
Step 6
From Cisco Unified Communications Manager, choose Device > Phone > Add New to add a phone using
an already created BAT phone template.
For more information on BAT, see Cisco Unified Communications Manager Bulk Administration Guide. For
more information on creating BAT Phone Templates, see Cisco Unified Communications Manager Bulk
Administration Guide, “Phone Template” chapter.
Related Topics
Cisco Unified IP Phone MAC Address Determination, on page 42
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
40
Cisco Unified IP Phones and Your Network
Cisco Unified Communications Manager Administration Phone Addition
To Next Page
Loading...
Need help?
General
Weight and Dimensions
