Cisco 7941G Administration Guide

To ChangeDescriptionOption
From Cisco Unified Communications
Manager Administration, choose Call
Routing > Directory Number .
Displays a sub-menu that indicates
whether auto answer is enabled
(Yes) or disabled (No) for the each
line.
Auto Answer Preferences
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Add a New Speed Dial .
Displays a sub-menu that displays
the lines available on the phone.
Select a line to see the speed dial
label and number assigned to that
line.
Speed Dials
Related Topics
Display Settings Menu, on page 60
Device Configuration Menu, on page 84
HTTP Configuration Menu
The HTTP Configuration menu displays the URLs of servers from which the phone obtains a variety of
information. This menu also displays information about the idle display on the phone.
Cisco Unified IP Phones do not support URLs with IPv6 addresses in the URL. This includes hostname
which maps to an IPv6 address for directories, services, messages, and information URLs. If you support
phone use of URLs, you must configure the phone and the servers that provide URL services with IPv4
addresses.
Note
The following table describes the HTTP Configuration menu options.
Table 18: HTTP Configuration Menu Options
To changeDescriptionOption
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
URL of the server from which
the phone obtains directory
information.
Directories URL
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
URL of the server from which
the phone obtains
Cisco Unified IP Phone
services.
Services URL
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
URL of the server from which
the phone obtains message
services.
Messages URL
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
89
Cisco Unified IP Phone Settings
HTTP Configuration Menu

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g