Cisco 7941G Administration Guide

Product-Specific Parameters
Cisco Unified Communications Manager Administration allows you to set some product specific configuration
parameters for Cisco Unified IP Phones. The following table lists the configuration windows and path in Cisco
Unified Communications Manager Administration.
Table 35: Configuration Windows for Cisco Unified IP Phone
PathConfiguration window
System > Enterprise Phone ConfigurationEnterprise Phone Configuration window
Device > Device Settings > Common Phone ProfileCommon Phone Profile window
Device > Phone; Product Specific Configuration area of windowPhone Configuration window
You can set the following parameters in any of the three configuration windows:
•
Settings Access
•
Video Capabilities
•
Web Access
•
Load Server
•
RTCP
•
Peer Firmware Sharing
•
Cisco Discovery Protocol (CDP): Switch Port
•
Cisco Discovery Protocol (CDP): PC Port
•
Link Layer Discovery Protocol - Media Endpoint Discover (LLDP-MED): Switch Port
•
Link Layer Discovery Protocol (LLDP): PC Port
•
IPv6 Load Server
•
802.1x Authentication
•
Switch Port Remote Configuration
•
PC Port Remote Configuration
•
Automatic Port Synchronization
•
SSH Access
When you set the parameters, select the Override Common Settings check box for each setting you wish to
update. If you do not check this box, the corresponding parameter setting does not take effect. If you set the
parameters at the three configuration windows, the setting takes precedence in the following order:
•
Phone Configuration window (highest precedence)
•
Common Phone Profile Configuration window
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
144
Features, Templates, Services, and Users
Product-Specific Parameters

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g