Epygi QX200 Administrator's Guide

QX50/QX200/QX2000; (SW Version 6.0.x) 114
QX50/QX200/QX2000 Manual II: Administrator’s Guide
Besides using static text in the subject line, you may want to use
the predefined tags to combine the needed subject:
• Hostname - the hostname of the QX IP PBX.
• Displayname - the caller's display name. This value is
not displayed for PSTN callers.
• Username - the caller's SIP username. For PBX caller
this is the caller's PBX number, for PSTN callers this is
the caller's PSTN number.
• Full name - the caller's full SIP address (SIP username
and the SIP server). For PBX caller this is the caller's
PBX number, for PSTN callers this is the caller's PSTN
number.
• Duration - the voice mail duration.
• Date - the date the voice mail was received.
Fig.II- 169: Voice Mail Recording Codec page
To insert the predefined tag to the subject line, you should simply click on the corresponding tag. The following format should be maintained to create a
flexible subject:
Example: Voice mail received from $[VM_DISPNAME] $[VM_DATE]
In this example, all email subjects will contain a static text "Voice mail received from" following by the display name of the caller and the date voice mail is
received.
FAX to E-mail format drop down list is used to define the format of the FAX document received in the voice mail and to be attached to the email, in case
user has enabled Send new voice messages via e-mail option from his personal Voice Mail Settings. TIFF or PDF formats may be selected here.
RTP Streaming Channels
The RTP Streaming Channels page is used to configure channels where the broadcast RTP streams are transmitted. These channels may be then
configured to be used as hold music (see Manual III – Extension User’s Guide) or any other type of music played to the caller.
The
RTP Streaming Channels
page consists of a table where RTP
channels are listed.
Add opens the Add Entry page where a new RTP channel can be
added.
The Add Entry page includes the following text fields:
The RTP Channel Name text field requires the name or the
number of the RTP channel.
The Port Number text field requires the broadcasting RTP port
number.
The Description text field requires optional information related to
the RTP streaming channel.
Fig.II- 170: RTP Streaming Channel page
Fig.II- 171: RTP Streaming Channel – Add Entry page
Gain Control
The
Gain Control
settings are used to define transmit and receive gains.
The
Gain Control
page offers
Transmit Gain
and
Receive Gain
drop down lists for each line that contains allowed gain values, which can be set up by the
administrator for every line.

Epygi QX200 Specifications

General

Brand	Epygi
Model	QX200
Category	Network Hardware
Language	English