Epygi QX200 Administrator's Guide

QX50/QX200/QX2000; (SW Version 6.0.x) 126
QX50/QX200/QX2000 Manual II: Administrator’s Guide
SIP IDS Settings
The
SIP IDS Settings
page includes the following components:
Enable SIP IDS checkbox selection allows to prevent the SIP
attacks.
The Add the IP address into the Blocked IP list in Firewall
checkbox allows to block SIP attacker’s IP address. SIP attacker’s
IP address will be blocked by QX IP PBX Firewall and will be
added on the Firewall Blocked IP List table.
The Discard SIP messages from IP address for checkbox allows
to discard the accumulated SIP messages from the QX IP PBX SIP
cash after defined timeout (default timeout value of “Discard SIP
messages from IP address for” service is 32 seconds).
Fig.II- 197: SIP IDS Settings page
The
Exceptions
link leads to the
Exceptions for SIP IDS
page
where user can require the trusted IP address(es) that can't be
blocked.
Add opens the page Exception IP- Add Entry, where a trusted IP
address can be established.
Delete removes the selected exceptions from the Exceptions for
SIP IDS table.
Fig.II- 198: Exceptions for SIP IDS Table

Epygi QX200 Specifications

General

Brand	Epygi
Model	QX200
Category	Network Hardware
Language	English