TX140 S1 Upgrade and Maintenance Manual 327
12 Accessible drives
This chapter provides information on how to install, remove or replace SATA
optical disk drives and USB backup drives.
Safety notes
V CAUTION!
● Before installing an accessible drive, acquaint yourself with the
drive's user documentation.
● When inserting an accessible drive into the server, ensure not to
pinch or strain any connected cables.
● When installing an accessible drive, hold it by its sides. Applying force
to the top of the casing may cause failures.
● When disposing of, transferring, or returning a backup drive, ensure
that all backup media has been removed from the drive.
● Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
● Circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs).
● For further safety information, please refer to chapter "Important
information" on page 41.
In this chapter
● "Mounting order for accessible drives" on page 328
● "Installing accessible drives" on page 330
● "Removing accessible drives" on page 351
● "Replacing accessible drives" on page 362
To Next Page
Loading...
Need help?
General