Husqvarna TE 250 Workshop Manual

G.17Part. N. 8000 B0148 (02-2008)
ENGINE OVERHAULING
Connecting rod small end bush replacement
The bush should be replaced using a correct size punch and drift.
Before the assembly, smear the bush outside surface with molybdenum disulfide
grease. Insert the bush from the side marked with the elephant and check that
the bush holes coincide with the ones of the rod.
The clearance between the bush and its seat is 0.00138÷0.00366 in. for 250cc
model and 0.00193÷0.00374 for 400-450-510 cc models. Ream the bush to an
internal diameter “C” as indicated on table.
MODEL INNER DIAMETER "C"
250 16,012÷16,022 mm
(0.6304÷0.6308 in.)
450-510 20,012÷20,022 mm
(0.7879÷0.7883 in.)

Husqvarna TE 250 Specifications

General

Displacement	249 cc
Transmission	6-speed
Cooling System	Liquid
Starter	Electric
Front Suspension	WP XPLOR 48
Front Brake	Disc brake
Rear Brake	Disc brake
Bore x Stroke	66.4 mm x 72 mm
Engine Type	2-Stroke