Husqvarna TE 250 Workshop Manual

I.33
Part. N. 8000 B0148 (02-2008)
FRONT SUSPENSION
Draining the oil
WARNING
This operation cannot be carried out with the fork installed on the motorcycle.
We recommend loosening the fork cap a little before removing the fork leg
from the fork yokes.
• Remove the fork leg from the steering crowns according to the procedure in the
motorcycle owner’s manual.
• Clamp the fork leg (11) in the vice.
• Remove the lock cap (1) from the fork leg using a 4mm open-ended spanner.
• Slowly lower the slider (11) on the stanchion tube.
• Free the fork leg (11) from the vice and tip it into a container of a suitable size to
drain the oil; pump the fork to help the oil flow out.
Check appearance, density and quality of the old oil to get an idea of the
condition of the sealing and guiding elements. If the oil is dense and dark with
solid particles in it you will have to replace the guide bushes and the sealing
elements.
11
1
11

Husqvarna TE 250 Specifications

General

Displacement	249 cc
Transmission	6-speed
Cooling System	Liquid
Starter	Electric
Front Suspension	WP XPLOR 48
Front Brake	Disc brake
Rear Brake	Disc brake
Bore x Stroke	66.4 mm x 72 mm
Engine Type	2-Stroke