Husqvarna TE 250 Workshop Manual

E.3Part. N. 8000 B0148 (02-2008)
GENERAL OPERATIONS
TE
RIGHT SIDE
LEFT SIDE
SMR 450-R
FOREWORD
The operations described in this section are referred to the removal of the engine from the motorcycle.
Nevertheless, in the case is had to effect operations on some parts of the motorcycle (as the access to the rear shock absorber, to the
electric parts, to the wiring harness etc.), it can be necessary to effect some partial dismantlements. The descriptions that refer to these
operations are listed beginning from the page E.15.

Husqvarna TE 250 Specifications

General

Displacement	249 cc
Transmission	6-speed
Cooling System	Liquid
Starter	Electric
Front Suspension	WP XPLOR 48
Front Brake	Disc brake
Rear Brake	Disc brake
Bore x Stroke	66.4 mm x 72 mm
Engine Type	2-Stroke