Husqvarna TE 250 Workshop Manual

O.30 Part. N. 8000 B0148 (02-2008)
“KIT” ASSEMBLING INSTRUCTIONS
Kit "RACING" (TE-SMR)
NOTE: All modifications reported below cause the registered vehicle to be non compliant and unsuitable for
circulating on public roads: consequently it may be used only in “closed circuits” by authorised subjects hold-
ing the relevant driving licence.
Identify the cover of the throttle cable pulley of the throttle body located on the right
side of the vehicle.
Move away the pedal starting lever from the pulley cover.
Loosen the hexagonal socket screw holding the plastic cover.
Remove the screw.

Husqvarna TE 250 Specifications

General

Displacement	249 cc
Transmission	6-speed
Cooling System	Liquid
Starter	Electric
Front Suspension	WP XPLOR 48
Front Brake	Disc brake
Rear Brake	Disc brake
Bore x Stroke	66.4 mm x 72 mm
Engine Type	2-Stroke