Husqvarna TE 250 Workshop Manual

SETTINGS AND ADJUSTMENTS
Part. N. 8000 B0148 (02-2008) D.35
Handlebar position change (SMR 450-R)
The handlebar can be moved to suit your driving style. To effect these operations,
remove the upper screw (3), upper clamp (1), lower screw (4) then lower clamp
(2).
Turn the lower clamp (2) 180° to move forward or backward (10mm- 0.04in.) the
handlebar position with respect to the original setup.
Once these operations are completed, tighten the screws (3) to 2,75-3,05 kgm
(27-30 Nm; 19.9-22 Lb/fts) and the screws (4) to 2,0-2,2 kgm (19,6-21,6 Nm; 14.5-
15.9 Lb/fts).
1
2
3

Husqvarna TE 250 Specifications

General

Displacement	249 cc
Transmission	6-speed
Cooling System	Liquid
Starter	Electric
Front Suspension	WP XPLOR 48
Front Brake	Disc brake
Rear Brake	Disc brake
Bore x Stroke	66.4 mm x 72 mm
Engine Type	2-Stroke