Husqvarna TE 250 Workshop Manual

E.2 Part. N. 8000 B0148 (02-2008)
GENERAL OPERATIONS
FOREWORD ............................................................ E. 3
REMOVAL OF ENGINE FROM MOTORCYCLE ...... E. 4
PARTIAL DISMALTEMENTS
Removal of saddle and battery .................................. E. 15
Removal of side panels ............................................. E. 16
Removal of rear frame with fender
(TE- SMR: with tail light) and air filter box assy .......... E. 17
Removal of exhaust system ...................................... E. 20
Removal of fuel tank, conveyors and spoiler ............. E. 23
Removal of cooling fan (TE-SMR), radiators and
coolant expansion tank (TE-SMR) ............................ E. 25
Removal of electronic power unit C.D.I.,
electronic coil, voltage regulator and clutch hose ....... E. 26
Removal of secondary drive chain ............................ E. 26

Husqvarna TE 250 Specifications

General

Displacement	249 cc
Transmission	6-speed
Cooling System	Liquid
Starter	Electric
Front Suspension	WP XPLOR 48
Front Brake	Disc brake
Rear Brake	Disc brake
Bore x Stroke	66.4 mm x 72 mm
Engine Type	2-Stroke