Husqvarna TE 250 Workshop Manual

E.17Part. N. 8000 B0148 (02-2008)
GENERAL OPERATIONS
Removal of rear frame with fender (TE- SMR: with tail light) and air filter
box assy.
Remove the saddle and disconnect the battery (A) from the electric system as
shown on page E.14.
Remove the side panels as shown on page E.15.
Remove the fuel tank as shown on page E.23.
TE-TC-TXC-SMR: use an 8 mm T-wrench and a 10 mm T-wrench inside to
remove the fastening screw (1) of silencers (4). Remove the spring (2) and use
an 8 mm T-wrench to remove also the screw (3); then extract the silencer (4).
1
4
2
3
4

Husqvarna TE 250 Specifications

General

Displacement	249 cc
Transmission	6-speed
Cooling System	Liquid
Starter	Electric
Front Suspension	WP XPLOR 48
Front Brake	Disc brake
Rear Brake	Disc brake
Bore x Stroke	66.4 mm x 72 mm
Engine Type	2-Stroke