Husqvarna TE 250 Workshop Manual

X.1Part. N. 8000 B0148 (02-2008)
TORQUE WRENCH SETTINGS
Section
X
Tighten all nuts and bolts with a torque wrench at the correct setting. Insufficient tightening of nuts or bolts can cause them to become damaged or loose leading to vehicle
damage or injury to the rider. Overtightening a nut or bolt can strip its thread or cause
breakage. The table shows the torque settings for the main nuts and bolts in relation to thread diameter, pitch and use. The above torque settings refer to threads which
have been cleaned with solvent.

Husqvarna TE 250 Specifications

General

Displacement	249 cc
Transmission	6-speed
Cooling System	Liquid
Starter	Electric
Front Suspension	WP XPLOR 48
Front Brake	Disc brake
Rear Brake	Disc brake
Bore x Stroke	66.4 mm x 72 mm
Engine Type	2-Stroke