Powering Off the SRX3600 Services Gateway
You can power off the services gateway in one of the following ways:
•
Graceful shutdown—Press and immediately release the POWER button on the front of the SFB (for 3
to 5 seconds) to initiate graceful shutdown. The device begins gracefully shutting down the operating
system and then powers itself off.
•
Forced shutdown—Press the POWER button and hold it for 15 seconds to power down the device
immediately.
You need to press the POWER button again to power on the device.
CAUTION: Use the graceful shutdown method to power off or reboot the services
gateway whenever possible. Use the forced shutdown method as a last resort to recover
the services gateway if the services gateway operating system is not responding to the
graceful shutdown method.
By default, even if you press the POWER button and hold it for 15 seconds, the device
will still do a graceful shutdown as long as the device is responsive and operating
normally. The device will resort to forced shutdown only if it fails or does not respond
to the operating system.
•
To remove power completely from the device, unplug the AC power cord (for AC-powered devices) or
switch off the DC power source (for DC-powered devices). After powering off the device, wait for at
least 10 seconds before powering on the device again. After powering on the device, wait for at least
10 seconds before powering it off.
CAUTION: Forced shutdown can result in data loss and corruption of the file system.
NOTE: If power is lost to the services gateway, the Power-On/Power-Off state is retained. For
example, if the services gateway loses power it is switched on, when power returns, the services
gateway will still be in the On state.
RELATED DOCUMENTATION
Required Tools and Parts for Grounding and Providing Power to the SRX3600 Services Gateway | 137
151
To Next Page
Loading...
Need help?
General
